 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ARINC 600 Backshells 527-257 EMI/RFI Shield Sock Strain-Relief Backshell for Size 1 ARINC 600 Series Connectors 527 257 NF P A 1 4 B 2 4 C 2 3 Product Series Basic Number Clamp Style Finish (Table II) Port (Omit for None) Connector Designator (See Note 2) P = All manufacturers' Plug and Receptacle Shells except the following: P1 = Cannon BKAD****322 Series Plug P2 = Cannon BKAC & BKAE Series Environmental Plug P3 = Cannon/Boeing BACC66 Plug P5 = Radiall/Boeing BACC66 Plug Port (Omit for None) Clamp Style Dash No. (Table I) (Omit for None) Clamp Style Port (Omit for None) Dash No. (Table I) (Omit for None) Dash No. (Table I) (Omit for None) Captivated Self-Locking Telescoping Screws CLAMP STYLE 1 Strain Relief without Braid Sock (620HS042-***) 3.750 (95.3) 1.250 (31.8) Max CLAMP STYLE 2 with Braid Sock (447HS557-***) E Closed without Braid Sock Port A D Typ Braid Sock Port B 5.620 (142.7) Braid Sock Port C .4.360 (110.7) .770 (19.6) .250 (6.4) C Closed with Braid Sock 1.000 (25.4) (c) 2004 Glenair, Inc. Tapped for #6-32 Screw (2 Holes each Half) Metric dimensions (mm) are indicated in parentheses. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com F-4 527-257 EMI/RFI Shield Sock Strain-Relief Backshell for Size 1 ARINC 600 Series Connectors TABLE I: CABLE ENTRY Shell Size 1 2 3 4 5 6 7* A Thread ISO Metric M12 x 1.0 - 6H M15 x 1.0 - 6H M18 x 1.0 - 6H M22 x 1.0 - 6H M25 x 1.0 - 6H M28 x 1.0 - 6H M31 x 1.0 - 6H B Max .980 (24.9) 1.050 (26.7) 1.200 (30.5) 1.030 (26.2) 1.440 (36.6) 1.560 (39.6) 1.690 (42.9) C +.031 (0.8) .265 (6.7) .310 (7.9) .390 (9.9) .506 (12.9) .591 (15.0) .661 (16.8) .744 (18.9) D Min .220 (5.6) .270 (6.9) .350 (8.9) .470 (11.9) .550 (14.0) .620 (15.7) .700 (17.8) E +.031 (0.8) .220 (5.6) .264 (6.7) .344 (8.7) .460 (11.7) .545 (13.8) .615 (15.6) .698 (17.7) TABLE III: FINISH OPTIONS Symbol B C* G* J LF M N NC NF T U** ZN Finish Cadmium Plate/Olive Drab Black Anodize Anodic Hard Coat Gold Iridite over Cadmium Plate over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Electroless Nickel Cadmium Plate/Olive Drab over Electroless Nickel Zinc Cobalt/Dark Olive Drab Cadmium Plate/Olive Drab over Electroless Nickel Cadmium Plate/Bright over Electroless Nickel Cadmium Plate/Black Zinc-Nickel Alloy/Olive Drab *Dash No. 7 can only be used on Ports "A" and "B". TABLE IV: CONNECTOR DESIGNATOR ARINC 600 series connector backshells are designed to replace the insert retainer plates. Due to non-standard modifications by the connector manufacturer, the backshell may require special design alterations to mate properly. The following should be used to determine if a backshell modification is required. Prior to ordering, consult factory with connector part numbers not shown to ensure a proper fit. Connector Designator P *Anodize finish is not suitable for EMI shielding or grounding applications. **Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. Connector Description All Manufacturer's Plug and Receptacle Shells, Except for Those Listed Below (Prior to ordering, consult factory with connector part numbers not listed below to ensure a proper fit.) Cannon BKAD****322 Series Plug Cannon/Radiall Environmental Plug Cannon/Boeing BACC 66 Plug Radiall/Boeing BACC66 Plug Cannon BKAC & BKAE XXX322 Series Environmental Plug P1 P2 P3 P5 P6 NOTES: 1. Metric dimensions (mm) are indicated in parentheses. 2. ARINC 600 Series Connector Backshells are designed to replace the insert retainer plates. Due to non-standard modifications by the connector manufacturer, the backshell may require special design alterations to mate properly. Prior to ordering, consult factory with connector partnumbers not shown in the Part Number Development to ensure a proper fit. (c) 2004 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. * 1211 AIR WAY * GLENDALE, CA 91201-2497 * 818-247-6000 * FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com F-5 ARINC 600 Backshells |
Price & Availability of 527527ZNP3A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |